DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Dolmar Makita
*****************************************************
#Post#: 49273--------------------------------------------------
Re: help identify this saw
DIR By: 660magnum
Date: November 15, 2014, 10:43 pm
---------------------------------------------------------
Appears to be a early model Sachs-Dolmar 109, 110, 111, & 115
family chainsaw. These were different displacement variations of
the same family of chainsaws. Some parts will interchange
between the different models. They all look alike. 1989 ish
#Post#: 49274--------------------------------------------------
Re: Re: help identify this saw
DIR By: Chainsawrepair
Date: November 15, 2014, 11:58 pm
---------------------------------------------------------
Neat idea. Never thought of using the slide show feature like
that.
#Post#: 49275--------------------------------------------------
Re: Re: help identify this saw
DIR By: 660magnum
Date: November 16, 2014, 12:23 am
---------------------------------------------------------
The 111 & 115 are 52cc or a little over 3 cubic inches. In the
early models, these two differed by the 111 had open port intake
transfers and the 115 had closed port transfers. 44mm bore
The 109 & 110 are 43 cc. They also differ by the open and closed
port transfers. 40mm bore
All these had the same crankshaft with a 34mm stroke
#Post#: 49278--------------------------------------------------
Re: Re: help identify this saw
DIR By: 660magnum
Date: November 16, 2014, 12:57 am
---------------------------------------------------------
Of course with chainsaws this old, whichever one of the family
it was originally may have been changed over the years? This
family of chainsaws was continued up until 2004 or so and there
are even blue Makita variations of the saw.
#Post#: 49281--------------------------------------------------
Re: Re: help identify this saw
DIR By: Warped5
Date: November 16, 2014, 7:46 am
---------------------------------------------------------
This saw is a Sachs Dolmar 112 ... 51cc. I have a clean one
that I had ported by a fellow on the Cumberland Plateau. Runs
very nicely. Here's a link to the info on the Acres site:
HTML http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/9994365aa5ccd12c88256b62005b8ecb?OpenDocument
#Post#: 49282--------------------------------------------------
Re: Re: help identify this saw
DIR By: 660magnum
Date: November 16, 2014, 8:15 am
---------------------------------------------------------
could very well be except the air filter cover doesn't attach
the same way? The primary air filter is shaped different..
#Post#: 49283--------------------------------------------------
Re: Re: help identify this saw
DIR By: prsiler
Date: November 16, 2014, 8:43 am
---------------------------------------------------------
Ha! That was the first time I've used photo bucket, so the slide
show thing was an accident. About the saw, the brake is missing
and it needs a carb kit. He got it in an auction with some other
saws and asked me to look at it for him. I need to find out how
much the brake parts would be. It runs right now but needs the
carb kit but if it needs a top end are there big bore kits for
it or do top end parts from that family of saws interchange?
Other than pulling the jug and measuring the bore is there a
good way to figure out the model, like numbers cast into it
somewhere? Thanks for the help.
#Post#: 49284--------------------------------------------------
Re: Re: help identify this saw
DIR By: 660magnum
Date: November 16, 2014, 8:53 am
---------------------------------------------------------
HTML http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/3acd707271d95c5588256b62005b16f2?OpenDocument
Remove the muffler and look at the piston to make an evaluation.
A compression check would help evaluate? Might only need rings?
Some had Walbro carbs and some had Tillotson carbs
New cylinders are difficult to come by. Occasionally used ones
show up. New pistons are available.
The 44mm bore was probably more common. There's a 45mm open port
bore but not very common and not as much power as the 44mm
closed port.
HTML http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/1f1bcd3cb265aebb88256e580007520b?OpenDocument
#Post#: 49310--------------------------------------------------
Re: Re: help identify this saw
DIR By: RoyM
Date: November 16, 2014, 12:25 pm
---------------------------------------------------------
They were very good saws, I am keeping my eyes open for similar
locally. Parts are getting scarce and rather expensive, you
might do better looking for a donor saw.
#Post#: 49341--------------------------------------------------
Re: Re: help identify this saw
DIR By: 166
Date: November 16, 2014, 7:57 pm
---------------------------------------------------------
Early model 111
[attachment deleted by admin]
*****************************************************
Page 1 of 1