DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Pioneer
*****************************************************
#Post#: 48293--------------------------------------------------
p41 ignition
By: blazen81 Date: October 24, 2014, 1:34 pm
---------------------------------------------------------
I have a damn near perfect shape p41 but no spark! Does anyone
have any idea were to get ignition parts or does anyone have one
for sale that runs ?
#Post#: 48298--------------------------------------------------
Re: p41 ignition
By: aclarke Date: October 24, 2014, 3:41 pm
---------------------------------------------------------
Check the basics like a ground wire shorting or bad plug
wire/plug first
Banta saw and others sell an aftermarket ignition kit for a lot
of the older partners. I believe the conversion works with some
but not all p41/41s saws.
#Post#: 48307--------------------------------------------------
Re: p41 ignition
By: blazen81 Date: October 24, 2014, 9:14 pm
---------------------------------------------------------
I checked wires for ohms seems to be fine but I am no
electrician. Cleaned all contact points grounds, flywheel and
ignition. I think these saws are badass and would love to get it
out cutting wood! thanks for any help
#Post#: 48311--------------------------------------------------
Re: p41 ignition
By: aclarke Date: October 24, 2014, 9:33 pm
---------------------------------------------------------
Does it have the blue (prestolite?) coil?
#Post#: 48312--------------------------------------------------
Re: p41 ignition
By: aclarke Date: October 24, 2014, 9:38 pm
---------------------------------------------------------
this one may work??
HTML http://www.bantasaw.com/catalog/viewproduct.asp?i=941&p=1755
HTML http://www.bantasaw.com/catalog/viewproduct.asp?i=941&p=1755
#Post#: 48314--------------------------------------------------
Re: p41 ignition
By: blazen81 Date: October 24, 2014, 9:47 pm
---------------------------------------------------------
the brand is Phelon and its black! the company is still in
business, I have tried to email them but no response!
#Post#: 48315--------------------------------------------------
Re: p41 ignition
By: blazen81 Date: October 24, 2014, 9:50 pm
---------------------------------------------------------
just read bantasaw the blue coil will not replace phelon! well
crap! back to drawing board. thanks!
#Post#: 48321--------------------------------------------------
Re: p41 ignition
By: aclarke Date: October 24, 2014, 10:38 pm
---------------------------------------------------------
Is your coil a two part type?
#Post#: 48322--------------------------------------------------
Re: p41 ignition
By: aclarke Date: October 24, 2014, 10:53 pm
---------------------------------------------------------
As far as I can tell if it's a two piece the "condenser coil"
p/n is phelon # 11760 431307. I'd suspect that before the coil
failing
#Post#: 48325--------------------------------------------------
Re: p41 ignition
By: 660magnum Date: October 24, 2014, 11:13 pm
---------------------------------------------------------
HTML http://www.ebay.com/itm/NEW-PHELON-CONDENSER-COIL-PN-507-476-432-/360758115204
*****************************************************
DIR Next Page