DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Modified Ported Work or Race saws
*****************************************************
#Post#: 48237--------------------------------------------------
pistons
By: EHP Date: October 23, 2014, 4:22 pm
---------------------------------------------------------
am placing a order for new pistons from Wiseco, 52mm, 60mm,
62mm, and 66 mm so if anyone wants any speak up cause their
selling real fast and not sure when or if there will be a next
order
#Post#: 48238--------------------------------------------------
Re: pistons
By: aclarke Date: October 23, 2014, 5:17 pm
---------------------------------------------------------
ED, I'll take two 66mm PM me for payment details. Thank you.
Adam
#Post#: 48249--------------------------------------------------
Re: pistons
By: EHP Date: October 23, 2014, 7:44 pm
---------------------------------------------------------
Adam, no problem on payment , I need to get an answer from
wiseco on finish build date and when I get that I will post it
here , If anyone else needs 60,62 or 66mm speak up so I can
increase the order as its about 80% sold out already
#Post#: 48252--------------------------------------------------
Re: pistons
By: Gatekeeper Date: October 23, 2014, 10:03 pm
---------------------------------------------------------
The 52 for the 7900?
#Post#: 48253--------------------------------------------------
Re: pistons
By: aclarke Date: October 23, 2014, 10:13 pm
---------------------------------------------------------
272, Dolmar I believe...
#Post#: 48278--------------------------------------------------
Re: pistons
By: EHP Date: October 24, 2014, 7:23 am
---------------------------------------------------------
52mm fits the 272 which is the base piston I used to build the
wide skirt from but will fit the 7900 and the 460 stihl, now
remember these pistons are for race not woods port AND you have
to have the cylinder bore replated in nikisal cause the ring
used from Wiseco is only meant to run on nikisal , if you put
this ring in a standard chrome bore it will last a very very
short time cause the ring will tear the chrome plating all to
hell . You also need to use the light weight 460 wrist pin .
Another thing when getting the cylinder replated I run abit
more clearance , Box says .0015 , I run .0022 to .0025 clearance
plus the clearance given on the box was before the coating on
the piston so your under the .0015 in true measurement with
coating , .0015 is just to tight for my liking
#Post#: 48279--------------------------------------------------
Re: pistons
By: adam32 Date: October 24, 2014, 9:04 am
---------------------------------------------------------
[quote author=aclarke link=topic=4221.msg48238#msg48238
date=1414102660]
ED, I'll take two 66mm PM me for payment details. Thank you.
Adam
[/quote]
Hey Adam, will I need any? Maybe a 62mm?
#Post#: 48281--------------------------------------------------
Re: pistons
By: Playinwood Date: October 24, 2014, 10:47 am
---------------------------------------------------------
aclarke, because Im curious, what are you doing with the 66mm
#Post#: 48282--------------------------------------------------
Re: pistons
By: aclarke Date: October 24, 2014, 10:50 am
---------------------------------------------------------
3120/090 hotsaw
#Post#: 48285--------------------------------------------------
Re: pistons
By: Cut4fun Date: October 24, 2014, 11:39 am
---------------------------------------------------------
[quote author=Playinwood link=topic=4221.msg48281#msg48281
date=1414165625]
aclarke, because Im curious, what are you doing with the 66mm
[/quote][quote author=aclarke link=topic=4221.msg48282#msg48282
date=1414165833]
3120/090 hotsaw
[/quote]
LOL I guess ole Jeff dont know you Adam. Jeff check out some of
his pics in threads of his work.
*****************************************************
DIR Next Page