DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Pioneer 
       *****************************************************
       #Post#: 47843--------------------------------------------------
       P41 saw Carb settings
       By: Bob Date: October 13, 2014, 11:24 am
       ---------------------------------------------------------
       Does anyone know what the carb settings are for a Pioneer p41
       saw built in the early 80s it has a tillotson carb on it.
       Thank You
       #Post#: 47867--------------------------------------------------
       Re: P41 saw Carb settings
       By: fossil Date: October 13, 2014, 7:42 pm
       ---------------------------------------------------------
       Hi Bob,
       Start with one turn out on both high and low mixture screws and
       go from there. Mine ended up around 1-1/16 on the low and one on
       the high.
       #Post#: 47907--------------------------------------------------
       Re: P41 saw Carb settings
       By: Little Al Date: October 15, 2014, 4:49 am
       ---------------------------------------------------------
       [quote author=Bob link=topic=4182.msg47843#msg47843
       date=1413217478]
       Does anyone know what the carb settings are for a Pioneer p41
       saw built in the early 80s it has a tillotson carb on it.
       Thank You
       [/quote]
       The paper work I have for this saw gives the default settings
       as Lo 1&1/8  & Hi as 7/8 turns out from lightly seated
       *****************************************************