DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Efco Olympyk Oleo-Mac
*****************************************************
#Post#: 3523--------------------------------------------------
Efco 158
DIR By: Old Iron Logging
Date: July 29, 2011, 5:42 pm
---------------------------------------------------------
Have enough parts to begin project 158 Efco. Putting a 156 cyl
on a 165 base. Will put me closer to the 60 cc limit at a small
show in Sept.
#Post#: 3525--------------------------------------------------
Re: Efco 158
DIR By: Chainsawrepair
Date: July 29, 2011, 5:46 pm
---------------------------------------------------------
Phew, thought it was a mistype or new model. Be sure to show
us the pics and details. 8) ;)
#Post#: 3531--------------------------------------------------
Re: Efco 158
DIR By: farmboy
Date: July 30, 2011, 10:32 am
---------------------------------------------------------
--- Quote from: Chainsawrepair link ---
>
> Phew, thought it was a mistype or new model. Be sure to show
us the pics and details. 8) ;)
>
--- End Quote ---
Me Too! Looking forward to this as I have several 165's to play
with.
Shep
#Post#: 3586--------------------------------------------------
Re: Efco 158
DIR By: Old Iron Logging
Date: August 2, 2011, 6:47 pm
---------------------------------------------------------
Just did a quick fitup, 156 cyl on a 165 case with no gasket.
Piston hits head at top of stroke. Will try a gasket tomorrow.
#Post#: 3591--------------------------------------------------
Re: Efco 158
DIR By: Old Iron Logging
Date: August 3, 2011, 6:29 pm
---------------------------------------------------------
Thought I had some gaskets. Had to order some. New gaskets are
.045 thick. Should roll over with a gasket.
#Post#: 3710--------------------------------------------------
Re: Efco 158
DIR By: Old Iron Logging
Date: August 9, 2011, 7:06 pm
---------------------------------------------------------
Gaskets came in, with gasket she rolls over. Will measure the
squish tomorrow.
#Post#: 3785--------------------------------------------------
Re: Efco 158
DIR By: Old Iron Logging
Date: August 16, 2011, 5:53 pm
---------------------------------------------------------
156 cyl on 165 crankcase. Squish with gasket .020. Works for me.
Stock or port, which way to go?
#Post#: 3787--------------------------------------------------
Re: Efco 158
DIR By: man of stihl
Date: August 16, 2011, 5:59 pm
---------------------------------------------------------
I would probably like to see how it runs stock. Then port it.
#Post#: 3788--------------------------------------------------
Re: Efco 158
DIR By: Chainsawrepair
Date: August 16, 2011, 6:14 pm
---------------------------------------------------------
I would run her stock first to compare to the other stock efco
saws in the same size range.
#Post#: 3791--------------------------------------------------
Re: Efco 158
DIR By: Old Iron Logging
Date: August 16, 2011, 6:43 pm
---------------------------------------------------------
I have 2 cyl's, will run 1 stock and 1 ported.
*****************************************************
Page 1 of 2
DIR Next Page