DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Homelite
       *****************************************************
       #Post#: 42971--------------------------------------------------
       fuel to air settings
   DIR By: circe
       Date: July 16, 2014, 10:55 am
       ---------------------------------------------------------
       hi
       do anybody have the tuning settings on the homelite super 2. it
       develop a little flu after 17 years of hard work. when it is
       cold it works like a dream, but after about 2 minutes it just
       cut out and wont start. when it has cooled down it start with 1
       pull. i cleaned and replaced all filters and feul lines. i also
       cleaned the carb.
       thanks
       frikkie
       #Post#: 42973--------------------------------------------------
       Re: feul to air settings
   DIR By: 660magnum
       Date: July 16, 2014, 11:03 am
       ---------------------------------------------------------
       Two turns on each needle - it should run and you can adjust from
       there.
       #Post#: 43011--------------------------------------------------
       Re: fuel to air settings
   DIR By: circe
       Date: July 17, 2014, 1:55 pm
       ---------------------------------------------------------
       hi
       thanks. i got it running today and made a truckload of firewood.
       frikkie
       *****************************************************
       Page 1 of 1