DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tool Shed
*****************************************************
#Post#: 41886--------------------------------------------------
Crankcase Splitting Tool (homemade)
By: fisaw Date: June 27, 2014, 11:02 am
---------------------------------------------------------
Homemade today,here are some pictures. ( slightly different
than the hv tool)
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A1640x480_zps480642a4.jpg~original[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A2640x480_zpsd53321dd.jpg~original[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A3640x480_zpsb81ef130.jpg~original[/img]
6mm plate , goes easily with a high quality jigsaw blade , (
slow rpm's + cutting oil)
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A4640x480_zpsb5e8982a.jpg~original[/img]
A few minutes later :) ( die grinder , carbide burrs , stones,
flap discs,angle grinder)
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A6640x480_zps98d5f85a.jpg~original[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A11_zps3407dd07.jpg[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A12_zpscc6b25c0.jpg[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A13640x480_zpsb531e2f1.jpg[/img]
Welding
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A15640x480_zpseb46c3bb.jpg~original[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A16640x480_zpsdade3037.jpg~original[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A17640x480_zpsd352ff77.jpg~original[/img]
[IMG]
HTML http://i123.photobucket.com/albums/o290/ForestFi/A19640x480_zps4e65cd24.jpg~original[/img]
#Post#: 41888--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: aclarke Date: June 27, 2014, 11:30 am
---------------------------------------------------------
Looks great!!
#Post#: 41889--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: KilliansRedLeo Date: June 27, 2014, 12:29 pm
---------------------------------------------------------
Great job! You might want to weld a piece of square section
tubing to the bottom. Then you can clamp it in your bench vice
and use it the opposite way around. That way with the saw upside
down you have the rod already between the ears and no worries
about messing up the rod or small end.
And is the case pictured a 61?
#Post#: 41890--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: Chainsawrepair Date: June 27, 2014, 12:30 pm
---------------------------------------------------------
Looks really nice. Looks oem.
You guys that can work with metals amaze me.
#Post#: 41906--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: 3000 FPS Date: June 27, 2014, 6:18 pm
---------------------------------------------------------
Very nice. You did a great job on cutting it out. With out a
band saw I would have thought that would be tough to do.
Looks good.
#Post#: 41925--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: sharkey Date: June 28, 2014, 4:41 pm
---------------------------------------------------------
Very nice work. Good pics and tutorial as well. Are you going
to make a couple more to sell?
#Post#: 41949--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: fisaw Date: June 29, 2014, 3:20 am
---------------------------------------------------------
Thanks
[/quote][quote author=KilliansRedLeo
link=topic=3701.msg41889#msg41889 date=1403890151]
And is the case pictured a 61?
[/quote] 51
[quote author=3000 FPS link=topic=3701.msg41906#msg41906
date=1403911124]
Very nice. You did a great job on cutting it out. With out a
band saw I would have thought that would be tough to do.
Looks good.[/quote]
Yes. I also had a plasma cutter, but it broke. It would have
been handy
[quote author=sharkey link=topic=3701.msg41925#msg41925
date=1403991715]
Are you going to make a couple more to sell?[/quote] maybe 1-2 ,
another for my friend
#Post#: 41951--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: 1manband Date: June 29, 2014, 5:00 am
---------------------------------------------------------
nice work.
#Post#: 41967--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: RoyM Date: June 29, 2014, 11:34 am
---------------------------------------------------------
Good job. ;D I like the attention to detail.
#Post#: 42024--------------------------------------------------
Re: Crankcase Splitting Tool (homemade)
By: srcarr52 Date: June 30, 2014, 9:42 am
---------------------------------------------------------
Nice stick welds!
*****************************************************
DIR Next Page