DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Husqvarna
*****************************************************
#Post#: 41152--------------------------------------------------
298XP some good ones still out there
DIR By: Tractorsaw1
Date: June 8, 2014, 12:29 pm
---------------------------------------------------------
I fell into a deal I couldn't refuse. It may need a cylinder,
not sure, was told the piston & rings were replaced & still has
low compression (90 psi), but the cylinder looked perfect. I
had been on the hunt for one of these big dawgs, Tuesday I can
test my arm strength, lol
#Post#: 41169--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: farmboy
Date: June 8, 2014, 6:20 pm
---------------------------------------------------------
Sweet!!! Drooling!! Nice find. Reminds me I need to take my
2100CD parts and assemble them.
Shep
#Post#: 41182--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: 3000 FPS
Date: June 8, 2014, 9:59 pm
---------------------------------------------------------
Great saw. If you find it to hard for your pulling arm I am
still young enough, just pass it my way. ;D
Nice find.
#Post#: 41183--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: 3000 FPS
Date: June 8, 2014, 10:01 pm
---------------------------------------------------------
I do have a question? What is the difference between the 298XP
and the 2100cd.
Are there any parts that interchange with each other.
#Post#: 41184--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: 660magnum
Date: June 8, 2014, 10:55 pm
---------------------------------------------------------
[img]
HTML http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/e833e76f0bf8658788256b5200199012/Images/0.84?OpenElement&FieldElemFormat=gif[/img]
[img]
HTML http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/b77c0ec7f047c10b88256d09002017a0/Images/0.84?OpenElement&FieldElemFormat=jpg[/img]
#Post#: 41185--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: 3000 FPS
Date: June 8, 2014, 11:05 pm
---------------------------------------------------------
Yes you are right. Seeing them side by side says it all.
#Post#: 41189--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: KilliansRedLeo
Date: June 9, 2014, 8:00 am
---------------------------------------------------------
Very nice saw. Great find! You going to run or flip it?
#Post#: 41190--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: Tractorsaw1
Date: June 9, 2014, 8:08 am
---------------------------------------------------------
I plan to keep it. I have a couple of 36" plus tress that are
on a slow death that will need to come down eventually, so
hopefully have this ready to go then. I have sold a few saws,
but don't usually buy them with intentions to flip them. There
just seems to be less room under the bench all the time.
#Post#: 41192--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: KilliansRedLeo
Date: June 9, 2014, 8:18 am
---------------------------------------------------------
Yeah, my basement is full of saws that I just couldn't get rid
of LOL!
#Post#: 41193--------------------------------------------------
Re: 298XP some good ones still out there
DIR By: aclarke
Date: June 9, 2014, 8:32 am
---------------------------------------------------------
Wasn't there some subtle differences in the two saws? (2100,
298) I had some original literature that listed fuel/oil
capacities as different, although I thought the cases were the
same?
*****************************************************
Page 1 of 2
DIR Next Page