DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 40366--------------------------------------------------
Maruyama
By: aclarke Date: May 19, 2014, 9:36 pm
---------------------------------------------------------
Picked up a. New 30cc Maruyama weed wacker to supplement our
Stihl fs55's on a fire reduction job we did last week. Machine
was a little over $400 and ran very well. Easily held its own
with the Stihls and had a nice sound and low end grunt. Japan
made and quality looks good. Anyone have any long term
experience with these?
#Post#: 40400--------------------------------------------------
Re: Maruyama
By: Chainsawrepair Date: May 20, 2014, 6:54 pm
---------------------------------------------------------
Never seen one. Do they make their own for trimmers? Chainsaws
with their name is other makers.
HTML http://www.beavervalleysupply.com/sectionb/martrim.htm
HTML http://maruyama-us.com/products/trimmers/
HTML http://maruyama-us.com/
HTML http://maruyama-us.com/products/engines/
Engines
High Power. High Performance. Genuine.
Genuine Maruyama Power. Maruyama designs, engineers and builds
engines in three distinct classes. Each is the product of years
of hard won, field-proven experience in two-stroke technology.
Each is high performance and highly serviceable, full of quick,
high torque power and long-term reliability. And each is a model
of the extraordinary quality that is the foundation of our
products and our reputation.
The Iron 5 commercial warranty. The only 5 year
commercial-use warranty in the industry.
CER Class Engine
Incredibly fuel efficient!
The MARUYAMA CER series 2-Stroke engines are the latest in our
line of ultra-clean models using our revolutionary HERE (High
Efficiency Recirculator Engine) technology. With this
technology, we can meet or exceed today’s ultra-low Tier3/Phase3
CARB and EPA engine regulations. With 30cc and 42cc models, this
is done without the need for a catalytic muffler. For all CER
models, this is done using fewer components and a proven,
less-costly single-venturi rotary Walbro carburetor. The most
significant visible change is internal; a pair of recirculator
grooves across the exhaust face of the piston. These engines
produce excellent power and torque characteristics with fuel
economy as much as 50% lower than prior models.
Made from the highest quality materials and components using
state-of-the-art CNC and robotics.
Incredibly fuel efficient; Best in class fuel economy. As
much as 50% better than prior models.
Crankcase volume configured to provide max. efficiency of
recirculator (HERE) design.
Larger flywheel and cylinder fin area for max. cooling.
Walbro 1-pc. PCI ignition on some models; Internally
advances timing for optimum performance and lowest emission
output.
Hard chrome-plated cylinder for an even LONGER engine life.
Heavy-duty, washable foam air filter.
Ultra-smooth polished chrome surface for lowest possible
emissions.
Inside the engine, the piston recirculator grooves are the
key to the patented HERE low-emission system.
All ball and needle-bearing construction inside engine.
Stainless steel mufflers designed for best performance and
low noise.
Forged, chrome-moly 3-pc. crankshaft with forged conrod.
VENOM Engine
Incredibly fuel efficient; About 50% savings over non-compliant
engines!
The new MARUYAMA VENOM Series 2-Stroke engines are much more
technologically advanced than their predecessors. We have
implemented our state-of-the-art HERE PHASE2 (3rd Generation
Recirculator design – High Efficiency Recirculator Engine)
technology in the creation of these ultra-clean modeled engines.
The VENOM B42 and B30 engines meet today’s ultra-low
Tier3/Phase3 CARB and EPA engine regulations. With these 41.5cc
and 30.2cc models, this is done without the need for a catalytic
muffler. Our VENOM brush cutters cut with a vengeance.
Unique features:
The cylinder is offset from the crankshaft centerline by
3mm.
The crankshaft counterweight is offset by 15°.
Benefit:
Lower Vibration ….
Lower Emissions …
Improved engine performance.
Incredibly fuel efficient; As much as 50% better than prior
models.
3-PC. hard chrome plated and polished cylinder for an even
LONGER engine life.
Heavy-duty, washable foam air filter.
BE & LE Class Engines:
The BE & LE Class is lightweight, high performance and True
Commercial through and through.
BE & LE Class Engines provide:
Full, bearing supported, chrome-moly crankshafts
Chrome-impregnated cylinders
High quality Walbro carburetors
Oversize fuel tanks for longer run times
Available in 22.5 and 25.4cc engine displacements
AE Class Engines:
The AE Class is our commercial workhorse. Rugged, powerful and
designed to run season after season, the AE Class is the
benchmark commercial engine system.
AE Class Engines provide:
Full, bearing supported, chrome-moly crankshafts
Chrome-impregnated cylinders
Dual piston rings
High quality Walbro carburetors
Full wrap, steel engine stand
Two-piece aluminum mufflers
Available in 25.4 and 41.5cc engine displacements
CER EFORCE Class Engines:
The EFORCE engine system is the future. High power, low
emission, high tech, EFORCE is our commitment to a lower
emission engine that delivers true commercial power and
performance.
EFORCE Engines provide:
Full, bearing supported, chrome-moly crankshafts
Chrome-impregnated cylinders
High quality Walbro carburetors
Extraordinary power to weight ratio
Excellent fuel efficiency
Patented HERE™ recirculator technology
CARB & EPA emissions compliant
#Post#: 40411--------------------------------------------------
Re: Maruyama
By: KilliansRedLeo Date: May 21, 2014, 7:07 am
---------------------------------------------------------
The MC-51 saw sure looks like a Dolmar to me! :-)
#Post#: 40413--------------------------------------------------
Re: Maruyama
By: 660magnum Date: May 21, 2014, 8:13 am
---------------------------------------------------------
Dolmar doesn't make their own whackers either?
#Post#: 40437--------------------------------------------------
Re: Maruyama
By: aclarke Date: May 21, 2014, 8:22 pm
---------------------------------------------------------
I'll look it over tomorrow, gonna buy a smaller one for my home.
We bought one of their hand held hedge trimmers last year and it
has been flawless. They build a top handle pruning Saw too!
Can't find one here though...
#Post#: 40442--------------------------------------------------
Re: Maruyama
By: 660magnum Date: May 21, 2014, 9:12 pm
---------------------------------------------------------
The Dolmars are made by Mitsubishi
#Post#: 61422--------------------------------------------------
Re: Maruyama
By: Cut4fun Date: September 10, 2015, 12:31 pm
---------------------------------------------------------
[member=1119]aclarke[/member] which one you just get for your
home?
#Post#: 61423--------------------------------------------------
Re: Maruyama
By: aclarke Date: September 10, 2015, 1:20 pm
---------------------------------------------------------
Kev, got the B23L straight shaft machine for the light duty
weeding and edging at my house. Nice and light, runs perfect.
Has the easy fill auto head on it. Feed a length of line in and
wind the head backwards to fill. No fuss. 23cc power isn't
suitable for heavy clearing but perfect for my needs. We have a
couple of thr B30L's at work and they are excellent for
commercial weed clearing with blade or string head. Super
torquey motors on the 30cc unit.
#Post#: 61427--------------------------------------------------
Re: Maruyama
By: Chainsawrepair Date: September 10, 2015, 2:09 pm
---------------------------------------------------------
I have yet to see any around our area, maybe Jim has? I havent.
*****************************************************