DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Husqvarna
*****************************************************
#Post#: 39877--------------------------------------------------
Husqvarna 350
By: jmester Date: May 7, 2014, 6:47 pm
---------------------------------------------------------
Got a seized 350. How involved is it to put on a 346 piston and
cylinder. And any other things to check out while I am in there.
#Post#: 39878--------------------------------------------------
Re: 350
By: 660magnum Date: May 7, 2014, 7:04 pm
---------------------------------------------------------
They bolt right on.
But there may be other problems with the boot clamp?
The muffler may have been loose and the exhaust burned a hole in
the oil tank?
There may have been a air leak to cause the seizure to begin
with?
#Post#: 39880--------------------------------------------------
Re: 350
By: jmester Date: May 7, 2014, 7:41 pm
---------------------------------------------------------
Lean seizure for sure. Going to put new crank seals and re seal
the engine pan. I think mweba did a video on a 350/346
conversion. May have to look around for it.
#Post#: 39881--------------------------------------------------
Re: 350
By: 660magnum Date: May 7, 2014, 8:00 pm
---------------------------------------------------------
+1
#Post#: 39883--------------------------------------------------
Re: 350
By: 660magnum Date: May 7, 2014, 8:02 pm
---------------------------------------------------------
HTML https://www.youtube.com/user/mweba1/featured
#Post#: 39996--------------------------------------------------
Re: 350
By: JohnG28 Date: May 9, 2014, 10:03 pm
---------------------------------------------------------
When I went through mine I got the updated clamp for the 350 and
it went together real easy and is good and tight. Not sure if it
would be same with a 346 cylinder though.
#Post#: 40026--------------------------------------------------
Re: 350
By: jmester Date: May 10, 2014, 5:48 pm
---------------------------------------------------------
Does any one know what the updated clamp and partition kit, part
number is.
#Post#: 40034--------------------------------------------------
Re: 350
By: farmboy Date: May 10, 2014, 8:49 pm
---------------------------------------------------------
HTML http://chainsawrepair.createaforum.com/husqvarna/husqvarna-346-357-359-353-update-info/
Shep
#Post#: 40036--------------------------------------------------
Re: 350
By: SawTroll Date: May 10, 2014, 11:46 pm
---------------------------------------------------------
[quote author=farmboy link=topic=3526.msg40034#msg40034
date=1399772982]
HTML http://chainsawrepair.createaforum.com/husqvarna/husqvarna-346-357-359-353-update-info/
Shep
[/quote]
Same ol' story, but it still is true. ;D
#Post#: 40042--------------------------------------------------
Re: 350
By: jmester Date: May 11, 2014, 7:18 am
---------------------------------------------------------
Thanks for the link. Would you guys recommend the 357/359 carb.
*****************************************************
DIR Next Page