DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Dolmar Makita
*****************************************************
#Post#: 35537--------------------------------------------------
Anybody ever change an anti vibe spring on the handle bar of a
6400 7300 0r 7900
DIR By: Ducksnuff870
Date: February 26, 2014, 7:16 pm
---------------------------------------------------------
I broke mine.Its the top spring that screws into the cylinder. I
have the old one off but the new has the aluminum
thingamabobbers screwed into the spring already.I'm scratchin my
head.
#Post#: 35540--------------------------------------------------
Re: Anybody ever change an anti vibe spring on the handle bar of
a 6400 7300 0r 7900
DIR By: 660magnum
Date: February 26, 2014, 7:22 pm
---------------------------------------------------------
IIRC a new spring has the screw already installed inside the
spring. A T27 reaches through the spring to tighten the spring
to the cylinder head.
I have a couple 7900's I have worked on but I also have 372's
and 365's which are somewhat like them and I get them confused
#Post#: 35541--------------------------------------------------
Re: Anybody ever change an anti vibe spring on the handle bar of
a 6400 7300 0r 7900
DIR By: Chainsawrepair
Date: February 26, 2014, 7:22 pm
---------------------------------------------------------
Maybe something in here on the updated replacement mount.
Dolmar 7900 7300 6400 service manual.
HTML http://www.baileysonline.com/PDF/6400to79001_repairmanual.pdf
Posted same time. Hoping Jim would tell you being I knew he had
them on hand.
#Post#: 35542--------------------------------------------------
Re: Anybody ever change an anti vibe spring on the handle bar of
a 6400 7300 0r 7900
DIR By: Ducksnuff870
Date: February 26, 2014, 7:25 pm
---------------------------------------------------------
thanks im workin on it now
#Post#: 35543--------------------------------------------------
Re: Anybody ever change an anti vibe spring on the handle bar of
a 6400 7300 0r 7900
DIR By: 660magnum
Date: February 26, 2014, 7:27 pm
---------------------------------------------------------
Somewhere around 2009 they started putting a travel limiter cup
on the top spring that limits how far you can flex the top
spring. You can put this cup on older saws.
#Post#: 35544--------------------------------------------------
Re: Anybody ever change an anti vibe spring on the handle bar of
a 6400 7300 0r 7900
DIR By: Ducksnuff870
Date: February 26, 2014, 7:33 pm
---------------------------------------------------------
back in biniss!!!! i compared it to a newer 6400 on the shelf
today and yes the newer one has a lil diff setup.
*****************************************************
Page 1 of 1