DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Chainsaws not listed - Gas OPE
*****************************************************
#Post#: 32704--------------------------------------------------
oil pump issue
By: Infinitive Date: January 25, 2014, 9:00 am
---------------------------------------------------------
I have a Craftsman/mtd saw 316.350840 I can not find the oil
pump asy 9228-310208 or updated version MC-301912-00 , the
plastic gear has worn it self off and wont throw oil, I am not
sure if there is a replacment that would work or? Thanks in
advance
#Post#: 32715--------------------------------------------------
Re: oil pump issue
By: Cut4fun Date: January 25, 2014, 12:03 pm
---------------------------------------------------------
New, it looks like most parts are NLA.
#Post#: 32717--------------------------------------------------
Re: oil pump issue
By: Infinitive Date: January 25, 2014, 1:01 pm
---------------------------------------------------------
I really just need the warm gear the plastic has worn off but
not sure were to look
#Post#: 32718--------------------------------------------------
Re: oil pump issue
By: rms61moparman Date: January 25, 2014, 1:02 pm
---------------------------------------------------------
HTML http://store.chainsawr.com/products/craftsman-model-316-350840-55cc-chainsaw-oil-pump-assembly
I believe that is about the best you are going to be able to do.
I believe that is the saw the government made Sears stop selling
due to it failing BS EPA regulations.
EPA most likely shut down importation of the parts also to get
them out of use as soon as possible.
Mike
#Post#: 32719--------------------------------------------------
Re: oil pump issue
By: rms61moparman Date: January 25, 2014, 1:05 pm
---------------------------------------------------------
When I went back, they now say sold out!
I hope you got that last one!
If not, that gear MIGHT be the same as what Poulan used.
I'd certainly try to match it up if the rest of the saw runs
good.
Mike
#Post#: 32725--------------------------------------------------
Re: oil pump issue
By: Infinitive Date: January 25, 2014, 2:07 pm
---------------------------------------------------------
thanks, i Just found it
*****************************************************