URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Solo
       *****************************************************
       #Post#: 28771--------------------------------------------------
       Anyone with a 652?
   DIR By: Soyyosolo
       Date: December 5, 2013, 12:28 pm
       ---------------------------------------------------------
       I bought this saw brand new with an 18" blade. I discovered the
       couling clips were very brittle and I wrote to the company
       telling of my dissapointment. They obligedly sent me ample
       replacements. I use it intermittenly with great care. I would
       guess I put 15 tanks max through it since purchasing. Now I am
       bewildered again. For the first time ever the saw stopped
       running abruptly. There is no spark. Coil? Wire disconnected? It
       is barely broke in!! Luky I have a Stihl I can count on even if
       it only has a 14" bar. Has anyone experienced similar?
       #Post#: 28782--------------------------------------------------
       Re: Anyone with a 652?
   DIR By: Chainsawrepair
       Date: December 5, 2013, 3:03 pm
       ---------------------------------------------------------
       I know nothing about this solo. But will try to help some.  Says
       semi pro saw for medium duty.  I dont even see a solo 652 in the
       IPL's on the solo website.
  HTML http://www.solousa.com/store/flypage/chain_saws/652-20.html
       Sure coil?  Have you checked at plug or with spark tester
       between the plug and coil?
       #Post#: 32777--------------------------------------------------
       Re: Anyone with a 652?
   DIR By: 7sleeper
       Date: January 26, 2014, 3:53 am
       ---------------------------------------------------------
       A few have them here but I have never heard of any problems (of
       the 646/652 line) from them. Is the coil loose so that the gap
       might ont be correct.
       They belong in the farmer/semipro category. Not a bad saw, but
       as usual a small company has problems being visulized on the
       market.
       7
       *****************************************************
       Page 1 of 1