DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: How To Basics and Fixes
*****************************************************
#Post#: 38619--------------------------------------------------
Re: Crank Bearings.
By: jmester Date: April 15, 2014, 2:54 pm
---------------------------------------------------------
Will have to do some more digging.
#Post#: 38622--------------------------------------------------
Re: Crank Bearings.
By: 660magnum Date: April 15, 2014, 3:28 pm
---------------------------------------------------------
both crank bearings on a 372 are 6202's normally with no seals
or shields.
The flywheel side seal reflects the major and minor diameters of
of the 6202
The clutch side seal reflects the major diameter of the 6202 but
the inner part of the seal fits on the sleeve and is larger than
the inner part of the flywheel side of the sleeve
I don't know about the other saws
#Post#: 38642--------------------------------------------------
Re: Crank Bearings.
By: jmester Date: April 15, 2014, 7:12 pm
---------------------------------------------------------
looks like a crank bearing and seal from the clutch side of a
stihl 460 will work. Just have to and mock it up and make sure
the oil driver and clutch dont rub. The problem with the 346
clutch side is there is no place to put the seal. The bearing is
almost flush with the out side of the case.
#Post#: 38644--------------------------------------------------
Re: Crank Bearings.
By: 660magnum Date: April 15, 2014, 7:15 pm
---------------------------------------------------------
I saw that on Ebay and I have a 346 new edition but I've never
been into it to mess with the bearings and seals. Looks like the
seal is a cup assembly that the bearing fits into?
#Post#: 38652--------------------------------------------------
Re: Crank Bearings.
By: jmester Date: April 15, 2014, 7:36 pm
---------------------------------------------------------
maybe on the new edition but the old edition i have the seal
fits into the bearing.
#Post#: 38655--------------------------------------------------
Re: Crank Bearings.
By: 660magnum Date: April 15, 2014, 7:45 pm
---------------------------------------------------------
IDK
#Post#: 38656--------------------------------------------------
Re: Crank Bearings.
By: jmester Date: April 15, 2014, 7:53 pm
---------------------------------------------------------
was trying to find a pic for you on the part list. but can not
remember the year the saw was made off the top of my head will
have to be tomorrow.
#Post#: 38657--------------------------------------------------
Re: Crank Bearings.
By: 660magnum Date: April 15, 2014, 7:59 pm
---------------------------------------------------------
Thanks
#Post#: 38659--------------------------------------------------
Re: Crank Bearings.
By: jmester Date: April 15, 2014, 8:19 pm
---------------------------------------------------------
Looked at the date 2008. It is a new edition.
#Post#: 38660--------------------------------------------------
Re: Crank Bearings.
By: jmester Date: April 15, 2014, 8:20 pm
---------------------------------------------------------
With the seal in the bearing.
*****************************************************
DIR Previous Page
DIR Next Page