DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tool Shed
*****************************************************
#Post#: 1046--------------------------------------------------
Degree wheel
By: Al Smith Date: March 15, 2011, 9:43 am
---------------------------------------------------------
For those who need one here's the hot set up .Copy a picture of
this and paste it on an old CD or dvd .Cheap wheel .
#Post#: 4122--------------------------------------------------
14-16" degree wheel
By: brokenbudget Date: September 11, 2011, 3:16 pm
---------------------------------------------------------
does anybody have one they want to get rid of? friends were over
last weekend and one of their kids got ahold of mine. it ended
up being dropped and shattered like an old whiskey glass >:( of
course they offered to buy me a new one, but nearly puked when i
told them it was almost $200 to replace (nice blue comp cams
14").
i've had that wheel since the late '90's when i was deep into
mustangs. it was kinda and old friend. ;) steve.
#Post#: 4123--------------------------------------------------
Re: 14-16" degree wheel
By: Chainsawrepair Date: September 11, 2011, 5:27 pm
---------------------------------------------------------
Big ones are price but the 10'' to 11' are reasonable.
Summit racing
HTML http://www.summitracing.com/search/Part-Type/Degree-Wheels/?keyword=degree+wheel&kr=degree+wheel
moroso has a 18" for $46, not as nice but the price is right.
Jegs
HTML http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&Ntk=all&Jnar=0&Ne=1%2B2%2B3%2B13%2B1147708&searchTerm=degree+wheel
#Post#: 4127--------------------------------------------------
Re: 14-16" degree wheel
By: brokenbudget Date: September 11, 2011, 5:57 pm
---------------------------------------------------------
hmmm, the moroso one does look like a contender :) bigger is
usually better ;D
don' the women say that also? :o
thanx chainsaw! if something else doesnt pan out by this coming
weekend i'll probably grab that one.
#Post#: 4129--------------------------------------------------
Re: 14-16" degree wheel
By: Al Smith Date: September 11, 2011, 6:36 pm
---------------------------------------------------------
The ones put out by Crane are kind of pricey .On that though I
just buy the mylar transfers from Mac Master Carr and put them
on a piece of aluminum to use on chainsaws .I've made several
and they work great .
#Post#: 4152--------------------------------------------------
Re: 14-16" degree wheel
By: brokenbudget Date: September 14, 2011, 11:30 am
---------------------------------------------------------
yeah al, that may work fine. however i like to use what i like
to use. i'm going to be pretty firm on kristian to get me a good
replacement for the one his boy broke. the thing i liked about
the comp cams one was you didn't need to use a wrench on the
stub to turn the engine over (car/truck), you just put your
hands on it and twisted it. i liked the openings for this
reason. it isn't going to be just for chainsaws. and i need a
good one that will take the abuse. plus, the indented numbers
and incraments were nice when your hands got dirty. sort of like
a grip on a handle :)
#Post#: 4165--------------------------------------------------
Re: 14-16" degree wheel
By: Al Smith Date: September 15, 2011, 5:06 pm
---------------------------------------------------------
Well the larger they are of course the more accurate . However a
big large wheel would be a gigantic pain in the behind to use on
a chainsaw .
#Post#: 4168--------------------------------------------------
Re: 14-16" degree wheel
By: brokenbudget Date: September 15, 2011, 6:40 pm
---------------------------------------------------------
it could be on some :) depends on what your using to hold it on
their.
after you get rid of the handle and pull start, theres lots of
room, after you use a 3" long adapter ;D
#Post#: 4174--------------------------------------------------
Re: 14-16" degree wheel
By: w8ye Date: September 16, 2011, 12:21 am
---------------------------------------------------------
I just use the 8" ones and print them off with the printer and
glue them to various things like thin plywood, Lexan, or acrylic
sheet. Have used poster board too. The reason for so many is
that I mostly use them to set the ignition timing on chainsaw
engine derived model airplane engines using a Hall effect sensor
and a Neodymium magnet in a hub where the flywheel used to be.
The Hall Effect sensor is the trigger for the CD type ignition
system. It is shielded and mostly use NGK BPMR7F or NGK CM6
plugs. I do have some engines that run plugs with a 1/4-28
thread. I've been doing this for years.
I tried to upload a degree wheel but 100K doesn't get much more
than a thumbnail.
PM me your email and I can Email you .jpg images of several
different styles of degree wheels. Or cut4fun can give you my
email address.
#Post#: 4175--------------------------------------------------
Re: 14-16" degree wheel
By: Al Smith Date: September 16, 2011, 6:33 am
---------------------------------------------------------
Gottya covered .
*****************************************************
DIR Next Page