DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Homelite
*****************************************************
#Post#: 13638--------------------------------------------------
Homelite 360 Bar Length
DIR By: davbell22602
Date: December 9, 2012, 8:29 pm
---------------------------------------------------------
I have Homelite 360 w/20in bar. I wanna big of bar length can I
put on it. The Oregon catalog says up to a 27in bar. I probably
wont go any bigger than 24in.
#Post#: 13680--------------------------------------------------
Re: Homelite 360 Bar Length
DIR By: davbell22602
Date: December 10, 2012, 9:41 pm
---------------------------------------------------------
Is a 24in bar too big for a 360?
#Post#: 13681--------------------------------------------------
Re: Homelite 360 Bar Length
DIR By: 660magnum
Date: December 10, 2012, 10:24 pm
---------------------------------------------------------
The saw is only 57cc with 24" as the longest recommended bar.
Personally, I would leave it at 20".
Maybe with skip tooth chain you could get away with a 24" bar?
#Post#: 13692--------------------------------------------------
Re: Homelite 360 Bar Length
DIR By: davbell22602
Date: December 11, 2012, 7:28 am
---------------------------------------------------------
--- Quote from: 660magnum link ---
>
> The saw is only 57cc with 24" as the longest recommended bar.
>
> Personally, I would leave it at 20".
>
> Maybe with skip tooth chain you could get away with a 24" bar?
>
--- End Quote ---
Thanks. Thats all I need to know. I'll leave it at 20in bar
then.
*****************************************************
Page 1 of 1