DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Tool Shed
*****************************************************
#Post#: 13485--------------------------------------------------
Chain Breaker
By: davbell22602 Date: December 6, 2012, 9:38 pm
---------------------------------------------------------
Anybody ever had a bad experience using the chain breaker thats
sold on Harbor Freight but made by Central Machinest.
#Post#: 15113--------------------------------------------------
Re: Chain Breaker
By: fordfairlane78 Date: January 10, 2013, 3:33 am
---------------------------------------------------------
The anvil is not hard enough imp,the sets for spinning are not
perfect and the spinner has a slight wobble but if your careful
it does work. I would say its definetly better than the portable
one sold by northern.
#Post#: 15213--------------------------------------------------
Re: Chain Breaker
By: Al Smith Date: January 12, 2013, 7:23 am
---------------------------------------------------------
I don't make up enough chains to justify a chain breaker unless
one comes about on the cheap .I just grind the rivet heads off
and seperate the chain tie straps with a little sharp chisel .
#Post#: 18118--------------------------------------------------
Re: Chain Breaker
By: dutchsawdoctor Date: March 15, 2013, 6:11 am
---------------------------------------------------------
[quote]I don't make up enough chains to justify a chain breaker
unless one comes about on the cheap .I just grind the rivet
heads off and seperate the chain tie straps with a little sharp
chisel .[/quote]
I also do it like that ;D
*****************************************************