DIR Return Create A Forum - Home
---------------------------------------------------------
Chainsaw Repair
HTML https://chainsawrepair.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Modified Ported Work or Race saws
*****************************************************
#Post#: 13215--------------------------------------------------
66mm pistons - Varney 3120 racing cylinder
By: Cut4fun Date: November 30, 2012, 12:46 pm
---------------------------------------------------------
Dennis here is the Varney cylinder I was telling you about. Says
for a stock appearing muffler saw.
So is this the type that was cast by him and later outlawed at
Webster to run on the hotsaws?
Info
Very used needing re-honed. Re-chamfered all ports. Bore now is
at 61.98mm needs to be 62mm
This is for a muffler saw 3120 stroker 46mm
New extra 62mm Bore D2 tool steel liner that comes with the
cylinder
Head,4 Studs 1/4x20, Reed Valve, Intake Flange, Jug &, Jug
spacer, 1 Liner semi finished can be bored to 66mm
for sale local
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120a.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120c.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120d.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120e.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120f.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/varney3120b.jpg[/img]
#Post#: 13569--------------------------------------------------
Re: Varney 3120 racing cylinder
By: Chainsawrepair Date: December 8, 2012, 4:07 pm
---------------------------------------------------------
Some of V. Loy 66mm hotsaw that is for sale. Lot more on feebay.
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/vl3120c.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/vl3120a.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/vl3120.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/vl3120b.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/vl3120d.jpg[/img]
For Sale is a Fresh Husky ready for Next years racing season!
This One is stroked to{ 44mm x 66mm Bore}This Equals{9.185 Cubic
Inches or 150.5CC}
All new crankshaft All mains are High end Gmn ss Silicon Nitride
Gray Ceramic High speed 18,500 Plus RPM
Custom made{ SUPER HARD COATED .031 single ring" ultra lite
Piston} Included is a new 1st oversize piston 66.25
This motor has 225 Psi and runs very well!! It Runs on 100%
Methanol and 10% klotz Benol castor oil Blend..This motor
Is a hand full it has Power to push and rev's to the moon! in
and out of the cut.. Included is a new Larry Jones Side Narrowed
Carlton Basic racing Chain NEW 64dl x0.050 with 11 Tooth Spur
sprocket Tracks really smooth Bar is NOS Sandvick
Fuel tank has been Partially filled with Air craft Grade tank
Epoxy Seal This does reduce some of the Volume, Which I Like"
You can still put a quart of fuel in the tank..Head is hard
coated and Has the V.loy Tech double Radius Profile Chamber.
The compression on this motor is not for the Handicapped Man
that wants it both ways High Horse power easy pull.. Can't Have
it all.. at least I'll be Honest and tell you all what I think1
A fast 100% Methanol Motor needs 225 PSI in order to get the
most from the fuel.. and That's Fact! This motor starts very
easy and on the 1st or 2nd Pull{ I Flush with Don't laugh 50%
wd40 &110 Avgas}Saw is for sale locally could end early..
For more info call V. Loy 1-501-865-6969 Overseas buyers Pay
Real Shipping cost on 34 Lbs in High end Shipping
Plastic heavy Duty double - walled box.
#Post#: 13570--------------------------------------------------
Re: Varney 3120 racing cylinder
By: Chainsawrepair Date: December 8, 2012, 4:08 pm
---------------------------------------------------------
Ed Heard EHP Wiseco 66mm 3120 pistons
Seems like everyone in their brother is building the 3120's
using the Wiseco 66mm pistons Ed Heard EHP had made up now days
in the 3120 with 090 top ends. ;D
Should be interesting at Chardon and Webster this year in
the hotsaw classes.
same length as the 3120 piston but do have a wider skirt bottom
edge of piston is 53.56mm wide or 2.107 inch 13mm pin size
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/66mm2.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/66mm3.jpg[/img]
[IMG]
HTML http://i59.photobucket.com/albums/g289/doemaster789/CH3120/66mm4.jpg[/img]
#Post#: 14840--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: William Greene Date: January 4, 2013, 7:48 pm
---------------------------------------------------------
here's 2 pic's from many years ago.
[URL=
HTML http://i116.photobucket.com/albums/o8/WILLIAMFGREENE/HOTSAWS002.jpg][img<br
/>width=700
height=525]
HTML http://i116.photobucket.com/albums/o8/WILLIAMFGREENE/HOTSAWS002.jpg[/img][/URL]
[URL=
HTML http://i116.photobucket.com/albums/o8/WILLIAMFGREENE/HOTSAWS011.jpg][img<br
/>width=700
height=525]
HTML http://i116.photobucket.com/albums/o8/WILLIAMFGREENE/HOTSAWS011.jpg[/img][/URL]
i took a pic of chauncey's chain breaking during a cut...he then
showed me why the special foot & leg ware.
at that time my pic was his most prized possesion. him and i
have had a few "talks" & i aint seen him in some time now.
anybody got his phone number or address ?
sorry for derailing thread.you can move it to the right
spot.this was the best place i could find to put my pic's &
story. william
#Post#: 14849--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: Chainsawrepair Date: January 4, 2013, 8:54 pm
---------------------------------------------------------
Dennis Cahoon might know. I will try to remember when we talk
next time.
I seen a chain hit Matt Cogar up in MI and it layed him open
through the chaps.
#Post#: 14893--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: William Greene Date: January 5, 2013, 11:45 am
---------------------------------------------------------
THANK YOU!
#Post#: 20948--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: William Greene Date: July 4, 2013, 11:52 am
---------------------------------------------------------
:o THANKS MAGNUM!....hope i can return the favor someday ;D
maybe you stop in someday 8)
#Post#: 69765--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: Chainsawrepair Date: February 25, 2016, 12:46 pm
---------------------------------------------------------
Was just looking for this Varney cylinder pics.
#Post#: 69774--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: adam32 Date: February 25, 2016, 4:39 pm
---------------------------------------------------------
[quote author=Cut4fun . link=topic=1331.msg69765#msg69765
date=1456425964]
Was just looking for this Varney cylinder pics.
[/quote]
That cylinder ended up in Oz didn't it?
#Post#: 69775--------------------------------------------------
Re: 66mm pistons - Varney 3120 racing cylinder
By: Chainsawrepair Date: February 25, 2016, 6:38 pm
---------------------------------------------------------
[quote author=adam32 link=topic=1331.msg69774#msg69774
date=1456439990]
[quote author=Cut4fun . link=topic=1331.msg69765#msg69765
date=1456425964]
Was just looking for this Varney cylinder pics.
[/quote]
That cylinder ended up in Oz didn't it?
[/quote]
Yep, so it will be posted over and over as the most awesome
never to be seen running saw ever. ;)
*****************************************************
DIR Next Page