URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       Chainsaw Repair
  HTML https://chainsawrepair.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Chainsaws not listed - Gas OPE
       *****************************************************
       #Post#: 10449--------------------------------------------------
       Weedeater FB25 leaf blower 25cc
       By: Chainsawrepair Date: July 23, 2012, 4:03 pm
       ---------------------------------------------------------
       Took one of these weedeater 25cc blower in with only 70 psi.
       I will say the crank at least is solid and the piston cir-clips
       are the smallest I have ever dealt with.   Only 2 cylinder
       bolts to hold cylinder on and are diagonal. O-ring type cylinder
       gasket.
       IMO They really are made to be  thrown away after burned up.
       Parts even though cheap for the repair are more then the whole
       unit bought new for $50 to $79. Thats not even including any
       labor cost even at my  low rate of $20 a hour.  ;)
       Just a generic pic online.
       #Post#: 10453--------------------------------------------------
       Re: Weedeater 25cc blower
       By: Al Smith Date: July 23, 2012, 5:40 pm
       ---------------------------------------------------------
       Well some of them are what they are .
       #Post#: 59370--------------------------------------------------
       Re: Weedeater FB25 leaf blower 25cc
       By: Chainsawrepair Date: July 8, 2015, 4:02 pm
       ---------------------------------------------------------
       One of these is what I had stole a primer bulb from awhile back
       for a mini tiller. Was traded in on a older husky blower I had.
       Weedeater very small size 25cc leaf blower FB25.   Ring was
       stuck from carbon bad.  Not worth putting $ in IMO.
       Just went out and put everything back together with new primer
       bulb. Somehow lost the dang air filter setting on the shelf. I
       just stole a echo felt air filter from a parts saw and cut to
       fit.
       Also had put new tygon 4040 lines in it 2-3 years ago. Just a
       shop floor cleaner when needed.
       Looks like this could be a candidate for the test of tygon lp
       1200 line.
       weed eater fb25 IPL
  HTML http://www.ereplacementparts.com/weed-eater-fb25-hand-held-blower-parts-c-17589_17590_157179.html?q=fb25
       *****************************************************