DIR Return Create A Forum - Home
---------------------------------------------------------
buildingSMART Canada
HTML https://buildingsmartcan.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: STANDARDS & GUIDELINES
*****************************************************
#Post#: 161--------------------------------------------------
Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 2:40 pm
---------------------------------------------------------
This is a collaborative effort to tests workflows with IFC4
Reference view from Revit. The IFC below was exported from revit
2017.
HTML https://drive.google.com/open?id=0B4WQYStg3fvneW1oaHR5djJ5d1E
HTML https://drive.google.com/open?id=0B4WQYStg3fvneW1oaHR5djJ5d1E
#Post#: 162--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 2:43 pm
---------------------------------------------------------
Results in navisworks Manage 2017 are negative. Missing ducts
and ducts fittings.
#Post#: 163--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 2:44 pm
---------------------------------------------------------
--- Quote from: carlveillette link ---
>
> Results in navisworks Manage 2017 are negative.
>
--- End Quote ---
An IFC2x3 from the same model.
#Post#: 164--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 2:52 pm
---------------------------------------------------------
Results in Solibri 9.7 are negative. Unable to open.
#Post#: 165--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 3:02 pm
---------------------------------------------------------
--- Quote from: carlveillette link ---
>
> Results in Solibri 9.7 are negative. Unable to open.
>
--- End Quote ---
Same model with IFC2x3.
#Post#: 166--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 3:03 pm
---------------------------------------------------------
Results in Tekla 2016i are negative. Unable to open.
#Post#: 167--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 3:03 pm
---------------------------------------------------------
--- Quote from: carlveillette link ---
>
> Results in Tekla 2016i are negative. Unable to open.
>
--- End Quote ---
Same model with IFC2x3.
#Post#: 168--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: carlveillette
Date: April 29, 2017, 3:15 pm
---------------------------------------------------------
Revit IFC4 imported in ArchiCAD 20.
#Post#: 174--------------------------------------------------
Re: Test IFC4 Reference view from Revit
DIR By: steve
Date: May 2, 2017, 3:20 pm
---------------------------------------------------------
Thanks Carl for this topic.
Looking forward to read comments from other IFC users and to see
IFC4 evolution in the following months...
*****************************************************
Page 1 of 1