DIR Return Create A Forum - Home
---------------------------------------------------------
big686
HTML https://big686.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: General Discussion
*****************************************************
#Post#: 262--------------------------------------------------
Re: Zgemma h2h setup
By: B4rrington Date: March 28, 2017, 10:37 am
---------------------------------------------------------
If you bought the box ready flashed with the line on then no it
should already be mounted
#Post#: 263--------------------------------------------------
Re: Zgemma h2h setup
By: cpears1981 Date: March 28, 2017, 10:40 am
---------------------------------------------------------
Yeah bought it with line and iptv+box too will turn router and
everything off see if that makes any difference when I get back
#Post#: 264--------------------------------------------------
Re: Zgemma h2h setup
By: B4rrington Date: March 28, 2017, 10:56 am
---------------------------------------------------------
If it's the first time out the box I can't see it being a
reflash job then. When you set it all up again make sure USB is
in the back.
#Post#: 266--------------------------------------------------
Re: Zgemma h2h setup
By: thelaw Date: March 28, 2017, 11:35 am
---------------------------------------------------------
thanks for the suggestion - I have checked the mount and
everything is as directed, but still no channels. Honestly its
like I need to be connected, but that was already done, was
hoping an admin could check my account to make sure I havent
been mysteriously disconnected
#Post#: 267--------------------------------------------------
Re: Zgemma h2h setup
By: B4rrington Date: March 28, 2017, 11:57 am
---------------------------------------------------------
Have you checked the cam is mgcamd_1.38r you check this by
pressing menu,info panel,softcam panel
#Post#: 272--------------------------------------------------
Re: Zgemma h2h setup
By: cpears1981 Date: March 28, 2017, 1:05 pm
---------------------------------------------------------
Could it be I have the letter a instead of r
On can
#Post#: 274--------------------------------------------------
Re: Zgemma h2h setup
By: B4rrington Date: March 28, 2017, 1:45 pm
---------------------------------------------------------
I. couldnt tell you if there's a difference mate but try
stopping it with the red button and restarting it with the green
button. Do you get the ipab menu up with the red button now
you've restarted it? Also is the cam you have mgcamd_1.35a?
#Post#: 276--------------------------------------------------
Re: Zgemma h2h setup
By: cpears1981 Date: March 28, 2017, 2:08 pm
---------------------------------------------------------
Yeah get ipab menu and I have followed all.instructions again
using numbers etc and still get to same point. Tried asking on
group for.help too but no reply yet.
#Post#: 278--------------------------------------------------
Re: Zgemma h2h setup
By: B4rrington Date: March 28, 2017, 2:13 pm
---------------------------------------------------------
Could be the splitter your cable is running from mate, if you've
posted on iPabs Facebook page you'll get sorted there mate admin
are top notch.
#Post#: 282--------------------------------------------------
Re: Zgemma h2h setup
By: cpears1981 Date: March 28, 2017, 2:26 pm
---------------------------------------------------------
I didn't know they had one I posted on s&v group
*****************************************************
DIR Next Page