DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Lighting & Electrical
*****************************************************
#Post#: 3738--------------------------------------------------
no spark no faults no spark please help
By: andrewmagas Date: November 16, 2016, 8:32 am
---------------------------------------------------------
hi everyone
just got a project 690r from 2008
and with no spark
i pluged it to tuneECU
got no faults
with tuneECU checked ignition coil got plug sparking
got voltage coming from pick up crank sensor
but when i try to start the bike i got no spark at the plug
got good negative on engine
any advice
tryed also unpluging the rollower sensor
or map sensor
didn't help
will really be happy if any ideas will come up
#Post#: 3745--------------------------------------------------
Re: no spark no faults no spark please help
By: Philip Pino Date: December 17, 2016, 4:18 pm
---------------------------------------------------------
Andrew, if you haven't fixed the problem yet, try a new battery.
I had an '09 690 Duke that stranded me 30 miles from home when
the battery went bad. The starter seemed to be cranking the
engine like normal, but it just wouldn't start. When I got the
bike home I checked everything you did and when I tested the
battery it was bad. New battery installed and it started right
up.
I hope this helps.
*****************************************************