DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: What Broke?
*****************************************************
#Post#: 3719--------------------------------------------------
SPOKES ..
By: por356s Date: August 26, 2016, 8:43 am
---------------------------------------------------------
I am building a rear wheel from scratch .. I need spokes .. in
the parts breakdown for a 2008 690R they have two different
spokes, cannot figure out if all the spokes on one side need one
part number or if all forward facing spokes need one part number
. Im new to building wheels , usually they are all the same,
aren't they? Thanks, for any advice!!
HTML http://www.ktmpartsnation.com/oemparts/a/ktm/524b8e25f8700231ac498cde/rear-wheel
#Post#: 3720--------------------------------------------------
Re: SPOKES ..
By: mcrider Date: August 26, 2016, 1:38 pm
---------------------------------------------------------
I use to lase a lot of wheels back in the day. I think you need
18 of each pn. The fish show #10 &#11, 18 each and nipples
#12, 36 each. So that would work together.
I looked at my '13 690 & it has a left & right spoke. The left
is straight the right has a crook at the hub.
You will need a way to true the wheel once lased. This is
truing jig I made out of angle iron. It takes a while to learn
to true a wheel.
HTML https://c1.staticflickr.com/9/8233/28960373720_8a08342c83_c.jpg
HTML https://flic.kr/p/L88u9hWheelStand002
HTML https://flic.kr/p/L88u9h
by Chris Hardy
HTML https://www.flickr.com/photos/11941159@N06/,
on Flickr
HTML https://c7.staticflickr.com/9/8803/28625424734_ffa6572297_c.jpg
HTML https://flic.kr/p/KBwMtLWheelStand001
HTML https://flic.kr/p/KBwMtL
by Chris Hardy
HTML https://www.flickr.com/photos/11941159@N06/,
on Flickr
*****************************************************