DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Lighting & Electrical
*****************************************************
#Post#: 3481--------------------------------------------------
Re: ABS fuse deletion
DIR By: Roostmaster
Date: March 18, 2016, 7:14 am
---------------------------------------------------------
If you want the rear ABS off without spending $ or having to
remember to do the 3 second ABS dash button press every time you
start the bike then all you need to do is remove the rear ABS
sensor from the rear caliper mount, wind up the cable and cable
tie it up under the battery box.
This will let you lock up the rear all the time with no
pre-start procedures, however the ABS light stays on.
I was amused by the ABS, I like it on the front as it prevents a
relatively heavy bike washing out, but the rear not locking got
me in trouble once when I had to do a high speed evasive
manoeuvre on the dirt, I needed to change direction and wash off
speed fast so I wanted the rear to lock so i could throw it
sideways, the ABS on the rear just had me heading deeper into
strife than I liked.
Ive just bought and fitted a SCOTTS rear disc guard shark fin, I
didnt know it was designed for pre ABS 690's because it doesnt
have the mounting point for the ABS sensor, which is why Ive
removed the ABS sensor and coiled it under the Battery.
I will cut the ABS mount section off the stock caliper mount and
get it welded onto the SCOTTS disc guard, may as well have it
working and I dont like the ABS light being on all the time.
*****************************************************
Page 2 of 2
DIR Previous Page