DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: GPS and Navigation
*****************************************************
#Post#: 1959--------------------------------------------------
GPS tracks and how to import them
By: Colorado Rider Date: October 12, 2014, 10:32 pm
---------------------------------------------------------
I don't know the answer to this one, I hope someone else does.
I have a GPS with topo 24 and Birdseye. I can see some trails,
but not a lot.
I read on another site that Garmin struggles with the concept so
of trails, what defines a trail and so on.
I could certainly make trails on my GPS by going a riding the
trail, but there must be a better way; especially if I have
never been there.
The forest service has static maps which are a good reference,
but they are not indexed for position for GPS use.
Perhaps there is some kind of collective groups that does this
type of thing.
Any ideas? :-\
#Post#: 1972--------------------------------------------------
Re: GPS tracks and how to import them
By: Rusty Shovel Date: October 14, 2014, 8:20 pm
---------------------------------------------------------
I think Garmin is hesitant to declare a track a "trail" unless
it is legally designated as such. Birdseye is great for this in
the desert, since you can just set up waypoints along the trails
you can see from above.
In Maine the forest up north is thick. There are tons of
trails, but are hard to find from above. The best I could do
was set waypoints at any exposed trail and then ride around
trying to link them. I enjoyed the added element of
exploration, though occasionally it proved frustrating.
Ultimately, I found that one of the best means of finding the
local trails was striking up conversation with folks at gas
stations.
#Post#: 1973--------------------------------------------------
Re: GPS tracks and how to import them
By: Colorado Rider Date: October 14, 2014, 10:27 pm
---------------------------------------------------------
Rusty,
I don't have any real expectations from Garmin; what I have is
pretty good; I do like the Birdseye. Like you, I don't care for
the topo lines, but one good thing about the topo map is that it
does identify some interesting points such as mines. I have
also found websites that provide even more information about
mines from the past.
I am sure plenty of people have made their own maps by making
tracks on their GPS and then sharing the file with others. I
have seen it done by some groups for off-road use for a
geographic area.
So far I haven't seen any groups that do that sort of thing for
the areas that I'm interested it; maybe we should start one.
Colorado
#Post#: 3116--------------------------------------------------
Re: GPS tracks and how to import them
By: RiverRunner Date: August 31, 2015, 9:55 pm
---------------------------------------------------------
I found this Basecamp Primer on another bike club's website:
HTML http://www.newenglandriders.org/Learn_BaseCamp.htm
#Post#: 3122--------------------------------------------------
Re: GPS tracks and how to import them
By: mcnut Date: September 1, 2015, 7:43 pm
---------------------------------------------------------
If you ride National Forest Lands they are required to publish a
Motor Vehicle Use Map (MVUM) which are often printed on
newsprint with few geographic reference points. More and more
these are being converted into Garmin compatible overlays (as
well as smart phone) files. The BLM is doing the same but behind
others.
Check with your local agency and ask, if not encourage them to
move into the current century.
Bruce M
*****************************************************