DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: GPS and Navigation
*****************************************************
#Post#: 1808--------------------------------------------------
Mounting possibilities...
DIR By: Colorado Rider
Date: September 27, 2014, 11:43 pm
---------------------------------------------------------
HTML http://www.fy-yff.com/2014/06/ktm-factory-gps-mount.html
HTML http://www.fy-yff.com/2014/06/ktm-factory-gps-mount.html
As listed from KTM-parts
HTML http://www.ktm-parts.com/76012992044.html#.VDlCnWddV8E
HTML http://www.ktm-parts.com/76012992044.html#.VDlCnWddV8E
SW-Motech actually lists a pretty cool mount specifically for
the 690:
HTML http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=141213150430469&ls=en&nc=1412131814-1133&rubnum=&artnum=GPS.00.646.10400__B&id=&gesamt_zeilen=&typid=155514495
HTML http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=141213150430469&ls=en&nc=1412131814-1133&rubnum=&artnum=GPS.00.646.10400__B&id=&gesamt_zeilen=&typid=155514495
#Post#: 2267--------------------------------------------------
Re: Mounting possibilities...
DIR By: Colorado Rider
Date: January 3, 2015, 1:49 pm
---------------------------------------------------------
Garmin Monterra GPS mounting and wiring
1) Get a good waterproof electrical connector, I used the 'NEW
Yiding 5 Kit 2 Pin Way Car Waterproof Electrical Connector Plug
with Wire' that I found on ebay at
HTML http://www.ebay.com/itm/351192178070
HTML http://www.ebay.com/itm/351192178070.
You need more than one so
that you can make a plug for when the GPS is not connected.
HTML https://lh4.googleusercontent.com/-c8q9QM91GvM/VKhB3oVVLpI/AAAAAAAAAbE/qP2gGS0Zhzk/w1270-h865-no/01%2Bthe%2Bconnector.jpg
2) Find the auxiliary 2 (ACC 2) connector behind the headlight -
just remove the two bolts on the side the hold the cable clips
on. ACC 1 is always on, ACC 2 is only on when the bike is one.
The red is hot and the black is ground (actually black with a
yellow tracer).
HTML https://lh3.googleusercontent.com/-AkOLO-PsCNA/VKhB3-I0BNI/AAAAAAAAAbI/zkCALZ8cxx4/w649-h865-no/02%2BBike%2Bplug%2Binstallation.jpg
3) Tie-wrap the female end of the plug to the bike fork - use
another male end as a waterproof plug.
HTML https://lh5.googleusercontent.com/-pl9wYc0oLek/VKhB3mLnhYI/AAAAAAAAAbA/HHKk5yx7VX4/w649-h865-no/03%2BBike%2Bwith%2Bplug%2Bin%2Bfor%2Bno%2BGPS.jpg
4) Solder the GPM mount wire to the male end of the plug and
apply an insulator; I used shrink-wrap.
HTML https://lh6.googleusercontent.com/-5aDRe8YhlKY/VKhB4R2r6KI/AAAAAAAAAbM/V5V81hvRWdc/w1299-h865-no/03%2BSoldering%2Bthe%2Bconnection%2Bto%2Bthe%2Bother%2Bend%2Bof%2Bthe%2Bplug.jpg
You don't need the yellow or blue wire to power the GPS, so I
just bent those back under the shrink-wrap. I also cut out the
fuse since the circuit is fused in the fuse box. I did keep the
sound connection though I plan to use bluetooth; just in case I
need it later.
SW Motech GPS mount without GPS
HTML https://lh5.googleusercontent.com/-XaQj_5-8-_Q/VKhB41NebsI/AAAAAAAAAbY/ukV9kG18yVk/w649-h865-no/04%2BGPS%2Bmount%2Bno%2BGPS.jpg
SW Motech GPS mount with GPS
HTML https://lh4.googleusercontent.com/-e7-6h0XcZhU/VKhB5Bim-rI/AAAAAAAAAbc/HBCohc1yKVA/w649-h865-no/05%2BGPS%2Bmount%2Bwith%2BGPS.jpg
*****************************************************
Page 1 of 1