DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Introductions
*****************************************************
#Post#: 1635--------------------------------------------------
Newbie with a 690E/R in Portland, Oregon
By: ttime4four Date: August 25, 2014, 1:04 am
---------------------------------------------------------
Took delivery of my '14 KTM 690 Enduro R two weeks ago and have
been busy with putting things on and taking things off.
HTML https://farm4.staticflickr.com/3885/15025253841_83758c613f_b.jpg
The photo above was during it's first maiden ride in the dirt.
Wings exhaust, flatland racing plate, Kouba 1" lower link,
Enduristan tank bag, ZipTy peg extenders & CJ Designs fuel
filler. More stuff on the way. :)
#Post#: 1637--------------------------------------------------
Re: Newbie with a 690E/R in Portland, Oregon
By: GSP Date: August 25, 2014, 7:31 am
---------------------------------------------------------
Nice, welcome to the forum
#Post#: 1640--------------------------------------------------
Re: Newbie with a 690E/R in Portland, Oregon
By: Rusty Shovel Date: August 25, 2014, 11:06 am
---------------------------------------------------------
[quote author=ttime4four link=topic=329.msg1635#msg1635
date=1408946646]
Wings exhaust, flatland racing plate, Kouba 1" lower link,
Enduristan tank bag, ZipTy peg extenders & CJ Designs fuel
filler. More stuff on the way. :)
[/quote]
Welcome to the forum.
Sounds like you have things well in hand. I agree that the
stock pegs are too short. I installed Rally Pegs, but there's
more than one way to skin a cat. You may wanna share more
details on the ZipTy peg extenders for your fellow 690'ers.
Again, welcome.
#Post#: 1782--------------------------------------------------
Re: Newbie with a 690E/R in Portland, Oregon
By: ssabers Date: September 20, 2014, 5:13 pm
---------------------------------------------------------
Where did you get your Wings exhaust and are you happy with it?
#Post#: 1783--------------------------------------------------
Re: Newbie with a 690E/R in Portland, Oregon
By: ttime4four Date: September 22, 2014, 1:51 pm
---------------------------------------------------------
re: Wings Exhaust.
Yes - very happy with it as it exceeded all expecations.
Akrapovic quality (Titanium/Carbon fiber) at over half the cost.
Nice and light and great sound.
Website -
HTML http://www.wings.si/ver3/index.html
Just contact Gorazd Marovic directly at mf@siol.net
Should be about $430 shipped to you in the US.
It shipped from Slovenia and I got mine in 2 days.
*****************************************************