DIR Return Create A Forum - Home
---------------------------------------------------------
690 Enduro R
HTML https://690enduro.createaforum.com
---------------------------------------------------------
*****************************************************
DIR Return to: Sweet Mods and Accessories
*****************************************************
#Post#: 52--------------------------------------------------
Bar risers
By: Altaboy Date: January 19, 2014, 8:35 am
---------------------------------------------------------
What's available for bar risers? I would like to raise my bars
an inch or so. Will the stock cables accommodate this?
#Post#: 53--------------------------------------------------
Re: Bar risers
By: Rusty Shovel Date: January 19, 2014, 2:37 pm
---------------------------------------------------------
ROX risers are pretty darn nice and they only cost ~$85. The
bonus is that you can change the fore/aft location of where they
are positioned.
HTML http://lh4.ggpht.com/_peAio9mDcUM/S71zl7EDR0I/AAAAAAAAI7s/D5tHPzKvhb8/s800/InstalledDualSportRisers.jpg
---
The Touratec Risers Suck, they don't allow any adjustment, and
you are likely to rub through some wires if your not careful.
---
If you're willing to spend a little more dough, RBOTT at ADV
makes a Riser Mount for 690 Enduro.
HTML http://www.advrider.com/forums/showthread.php?t=397011&highlight=rbott
HTML http://www.advrider.com/forums/showthread.php?t=397011&highlight=rbott
HTML http://bj.smugmug.com/photos/396637715_G66jr-L.jpg
---
You can go as high as one inch without dealing with cable play
issues. You can go up to 2" if you're willing to reroute and
zip tie the cables under the tank for more play. Any higher
than that, you'll need longer cables.
#Post#: 55--------------------------------------------------
Re: Bar risers
By: Altaboy Date: January 21, 2014, 5:26 pm
---------------------------------------------------------
Thanks
#Post#: 63--------------------------------------------------
Re: Bar risers
By: B3EAR Date: January 21, 2014, 7:44 pm
---------------------------------------------------------
Rusty… Your link to the ADVrider site won't work. FYI. Looking
forward to seeing all the info come pouring into this site.
Thanks
#Post#: 126--------------------------------------------------
Re: Bar risers
By: R.J. Date: January 28, 2014, 10:19 pm
---------------------------------------------------------
Hi Altaboy, fancy meeting you here.
Say if you are thinking of machining some nice 2 inch spacers
like you did for the 800 I am in for a set.
#Post#: 130--------------------------------------------------
Re: Bar risers
By: Altaboy Date: January 29, 2014, 8:29 am
---------------------------------------------------------
I'll get right on that
#Post#: 3652--------------------------------------------------
Re: Bar risers
By: Frank Black Date: July 6, 2016, 4:34 pm
---------------------------------------------------------
Can anyone else confirm that 2" risers will fit with out issue?
I read a review on revzilla that stated the 2" risers stretched
the cables to the max, uncomfortably so. But not sure if he had
rerouted anything.
Thanks!
*****************************************************