URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       690 Enduro R
  HTML https://690enduro.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Sweet Mods and Accessories
       *****************************************************
       #Post#: 1263--------------------------------------------------
       Scottoiler; automatic chain oiler
       By: Colorado Rider Date: June 22, 2014, 8:53 pm
       ---------------------------------------------------------
       I'm not one who enjoys oiling the chain on the motorcycle;
       especially without a center-stand.  Add to the the fact that
       riding through dirt really make the chain dirty fast and then
       commuting and it is more than the average chain oiling.  I do
       like a clean well-oiled chain.  Okay, the chain in the picture
       is not that clean, but I did just get through ridding in dirt
       and sand.
       The pictures show the installation of the 'SCOTTOILER KTM KIT -
       VACUUM OPERATED CHAIN OILER' from
  HTML http://www.scottoiler.com/us/Kits/Scottoiler-KTM-Kit-California-Spec/flypage.tpl.html
  HTML http://www.scottoiler.com/us/Kits/Scottoiler-KTM-Kit-California-Spec/flypage.tpl.html
       I don't think that anyone else sells them but the manufacturer;
       at least I didn't find any.
       Basically the unit holds the chain oil and dispenses it by
       gravity flow when the engine has vacuum and opens the valve in
       the unit.  The oil then goes down a tube to the chain.
       Here are some pictures of the installation on my 14:
       Step on is the find a vacuum line or port that you can tap into;
       remove the side panels and look at the left side.
  HTML https://lh3.googleusercontent.com/-Ek4h70f42cQ/U6eCpDnbprI/AAAAAAAAARo/kHLFlFrU3gw/w1153-h865-no/20140622_104652.jpg
       Just in front of what looks like the fuel injection control unit
       is a vacuum hose; some models may just have a plug here.
  HTML https://lh4.googleusercontent.com/-X0FltWiYYzA/U6eCpE2HbrI/AAAAAAAAAQI/8zXKHCanFXw/w649-h865-no/20140622_104723.jpg
       On mine the vacuum hose goes to the purge valve for the
       evaporation canister (emissions stuff).  Also note the very
       limited space on the left side of the motorcycle due to the
       exhaust.  Also the heat from the exhaust would be detrimental.
  HTML https://lh3.googleusercontent.com/-_Aj3qYT1yzY/U6eCpI3ISYI/AAAAAAAAAQQ/o8uynOqzwgQ/w649-h865-no/20140622_104741.jpg
       Cut the line and install the vacuum T
  HTML https://lh5.googleusercontent.com/-YtrxL9eEk0o/U6eCp4DLXwI/AAAAAAAAAQU/suXNxwlfGdA/w649-h865-no/20140622_105853.jpg
       Mount the unit with the nifty supplied orange zip-ties and
       connect the vacuum to the top of the unit.
  HTML https://lh4.googleusercontent.com/-A1sl_EAbeso/U6eCqmPfjCI/AAAAAAAAAQg/8vFaBgJHkpY/w649-h865-no/20140622_111919.jpg
       Mount the oil feed unit to the swing-arm.  The instructions said
       that I didn't need the spacer, but it seemed to me that I did
       since the mounting plate would not fit flush without it.
  HTML https://lh5.googleusercontent.com/-ki_1gQWkCnw/U6eCrAu_QZI/AAAAAAAAAQs/uw06LylaEW4/w1153-h865-no/20140622_114431.jpg
       At this point you are thinking 'what about that hole in the
       unit; won't the oil come out'?
  HTML https://lh6.googleusercontent.com/-PCR44sqHWbE/U6eCrIRWeFI/AAAAAAAAAQw/OCQEylrFfrM/w1153-h865-no/20140622_114443.jpg
       A remote mounted breather goes in the hole and doubles as a fill
       point; or you can just remove it and fill it directly.
  HTML https://lh3.googleusercontent.com/-a-uD_SS4kD4/U6eCsMGiEsI/AAAAAAAAARA/aizShQYwajs/w649-h865-no/20140622_125001.jpg
       Full of blue-goo:
  HTML https://lh6.googleusercontent.com/-pK17FVjX78M/U6eCsWXN8WI/AAAAAAAAARE/cNpYHoVxhy4/w912-h865-no/20140622_125011.jpg
       It does take a while to prime as the oil moves slowly.  It
       definitely stops when there is no vacuum.  I then put some of
       the blue oil directly on the chain and drove it around a bit.
       I'll still have to dial it in for the right rate, but so far, so
       good.
       The company was really nice to work with and shipped promptly
       and provided tracking.
       I hope this helps someone!
       Colorado
       #Post#: 1277--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: seabeegt Date: June 28, 2014, 1:02 pm
       ---------------------------------------------------------
       Looks cool. I'm the dude who goes crazy on lubing the chain too.
       It can be kind of a chore, but it's well worth the time to keep
       a chain properly maintained. I just need to find a lube that'll
       stay on the chain without flinging off everywhere! How much did
       that unit cost? And what kinda oil do you put in it?  :P
       #Post#: 1282--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: Colorado Rider Date: June 28, 2014, 2:38 pm
       ---------------------------------------------------------
       Seabeegt,
       It is about $135 and comes with the oil (probably enough to fill
       it up twice) - it doesn't really use that much, so I wouldn't be
       surprised if it lasted for a season.  The oil that comes with it
       appears to stick well, so it doesn't drip off chain except a
       little at the front of the sprocket just like a well-oiled chain
       would do.  I've been running it for a month, and I really like
       that way it is working; great oil coverage and no more spray
       cans.
  HTML https://lh3.googleusercontent.com/-kUytwCqdRt0/U68YQ-fhUQI/AAAAAAAAAUI/fq1ItR5a5oM/w628-h837-no/20140625_123804.jpg
       Colorado
       #Post#: 1285--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: seabeegt Date: June 28, 2014, 4:48 pm
       ---------------------------------------------------------
       Coolio. I like the idea. Hope trail trash doesn't rip it off!
       :P
       #Post#: 1886--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: Colorado Rider Date: October 5, 2014, 7:48 pm
       ---------------------------------------------------------
       End of the year update.  One fill of the onboard oil bottle did
       it for the year with 2,300 miles.  Not only less work but
       economical; after refilling it, I still have half a bottle left!
       After I went to a particularly rough area, I did rip off the
       oil-feed line from the swing-arm, but it was easily repaired.
       Highly recommended.
       #Post#: 2165--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: Philip Pino Date: December 3, 2014, 3:38 am
       ---------------------------------------------------------
       [quote author=Colorado Rider link=topic=266.msg1282#msg1282
       date=1403984305]
       Seabeegt,
       It is about $135 and comes with the oil (probably enough to fill
       it up twice) - it doesn't really use that much, so I wouldn't be
       surprised if it lasted for a season.  The oil that comes with it
       appears to stick well, so it doesn't drip off chain except a
       little at the front of the sprocket just like a well-oiled chain
       would do.  I've been running it for a month, and I really like
       that way it is working; great oil coverage and no more spray
       cans.
  HTML https://lh3.googleusercontent.com/-kUytwCqdRt0/U68YQ-fhUQI/AAAAAAAAAUI/fq1ItR5a5oM/w628-h837-no/20140625_123804.jpg
       Colorado
       [/quote]Colorado, you say it coats the chain well.  Even though
       oil is being supplied to one side of the chain, does the oil
       work its way to the other side as well.  I can't tell from the
       photo.
       #Post#: 2172--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: Colorado Rider Date: December 3, 2014, 10:42 pm
       ---------------------------------------------------------
       Yeah, I read that too on some other website, but I just have not
       found this to be an issue.  Think about it, when you use the
       spray can, you are mostly going to put the oil on one side and
       it still works.  This even works better since it is constantly
       getting oiled as you ride.  If you get in dirt conditions, you
       can see it work it's way across the chain, but it gets
       everywhere.  You can also adjust it for more or less flow
       depending on the conditions.
       #Post#: 2173--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: Philip Pino Date: December 4, 2014, 2:22 am
       ---------------------------------------------------------
       Thanks.  I'll be doing an long distance ride next summer and
       don't want to worry about lubing the chain.  Especially since
       this bike doesn't have a center stand.
       #Post#: 2610--------------------------------------------------
       Re: Scottoiler; automatic chain oiler
       By: Guymcfly Date: April 5, 2015, 7:16 am
       ---------------------------------------------------------
       I got to admit I don't put oil on the chain anymore. It only
       seems to make sand and grit stick more and chew out the chain
       and sprockets faster. For me it was a new chain with a few puffs
       of powdered graphite from the hardware shop. Seems to work great
       and since doing this things are holding up really well.
       *****************************************************