URI:
   DIR Return Create A Forum - Home
       ---------------------------------------------------------
       690 Enduro R
  HTML https://690enduro.createaforum.com
       ---------------------------------------------------------
       *****************************************************
   DIR Return to: Sprockets and Chains
       *****************************************************
       #Post#: 706--------------------------------------------------
       Supermoto Gearing
       By: seabeegt Date: April 6, 2014, 1:57 am
       ---------------------------------------------------------
       So right now I'm running 15/42 with 17" wheels and I lost some
       top end from switching over from the enduro setup. I was running
       the exact same gearing with 18/21" wheels. Anyone know where I
       can get a smaller rear sprocket that'll fit the 690 cush hub?
       #Post#: 710--------------------------------------------------
       Re: Supermoto Gearing
       By: coarsegoldkid Date: April 6, 2014, 11:41 am
       ---------------------------------------------------------
       How much top end did you lose.  And do you know how the SMC is
       geared?
       #Post#: 720--------------------------------------------------
       Re: Supermoto Gearing
       By: seabeegt Date: April 8, 2014, 5:26 am
       ---------------------------------------------------------
       hmmmm. I dunno. I used to cruise 80 mph at aobut 5k and now it
       takes 6k to get that outta her. Suppose I didn't lose too much.
       Just feels like she has to work harder to do the job she's used
       to doing. Figures about right. Runnin' the same pace, just with
       shorter legs.  :-\
       #Post#: 1983--------------------------------------------------
       Re: Supermoto Gearing
       By: Guymcfly Date: October 17, 2014, 10:05 am
       ---------------------------------------------------------
       Did you end up finding your 42? If not Sidewinder do custom size
       sprockets.
       #Post#: 1984--------------------------------------------------
       Re: Supermoto Gearing
       By: Bartlioni Date: October 17, 2014, 2:52 pm
       ---------------------------------------------------------
       Interesting.  I'm puzzled.  At the risk of asking a dumb
       question, did you reset your speedo for the new tire / rim
       combination?  A 15/42 setup should feel like you gave up first
       gear and added a 'seventh' gear based on the shift points.  I'm
       running 16/45 which is the same gear ratio as you're running.
       My minimum speed in sixth gear before she starts to bog down is
       around 55mph.  Yours should be about the same although I'm
       beginning to suspect the shift points may not be identical
       although the ratios are the same.  I'll be doing some
       experiments to see if my hunch is correct in the not-so-distant
       future.  (I'm going to try the 15/42 combination and see if
       there's a difference in the shift points from the 16/45.)  My
       hunch is that there is, but I have no evidence to back it up
       yet.  Just a theory)
       #Post#: 3231--------------------------------------------------
       Re: Supermoto Gearing
       By: thedubsack85 Date: October 21, 2015, 12:28 pm
       ---------------------------------------------------------
       15/42 is stock gearing. it's where I'm at right now and i like
       it but i might go 16/42 like above and a few of my friends
       have.. we shall see!
       *****************************************************