/*********************************************************************
 *                
 * Filename:      irlan_eth.c
 * Version:       
 * Description:   
 * Status:        Experimental.
 * Author:        Dag Brattli <dagb@cs.uit.no>
 * Created at:    Thu Oct 15 08:37:58 1998
 * Modified at:   Wed Feb  3 19:58:28 1999
 * Modified by:   Dag Brattli <dagb@cs.uit.no>
 * Sources:       skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
 *                slip.c by Laurence Culhane,   <loz@holmes.demon.co.uk>
 *                          Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
 * 
 *     Copyright (c) 1998 Dag Brattli, All Rights Reserved.
 *      
 *     This program is free software; you can redistribute it and/or 
 *     modify it under the terms of the GNU General Public License as 
 *     published by the Free Software Foundation; either version 2 of 
 *     the License, or (at your option) any later version.
 *  
 *     Neither Dag Brattli nor University of Tromsų admit liability nor
 *     provide warranty for any of this software. This material is 
 *     provided "AS-IS" and at no charge.
 *     
 ********************************************************************/

#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/arp.h>

#include <net/irda/irda.h>
#include <net/irda/irlan_common.h>
#include <net/irda/irlan_eth.h>

/*
 * Function irlan_eth_tx (skb)
 *
 *    Transmits ethernet frames over IrDA link.
 *
 */
int irlan_eth_xmit(struct sk_buff *skb, struct device *dev)
{
	struct irlan_cb *self;

	DEBUG(4, __FUNCTION__ "()\n");
	
	self = (struct irlan_cb *) dev->priv;

	ASSERT(self != NULL, return 0;);
	ASSERT(self->magic == IRLAN_MAGIC, return 0;);

	/* Lock transmit buffer */
	if (irda_lock((void *) &dev->tbusy) == FALSE) {
		/*
		 * If we get here, some higher level has decided we are broken.
		 * There should really be a "kick me" function call instead.
		 */
		int tickssofar = jiffies - dev->trans_start; 
		
		if (tickssofar < 5) 
 			return -EBUSY;
		
 		dev->tbusy = 0;
 		dev->trans_start = jiffies;
	}
	
	DEBUG(4, "Room left at head: %d\n", skb_headroom(skb));
	DEBUG(4, "Room left at tail: %d\n", skb_tailroom(skb));
	DEBUG(4, "Required room: %d\n", IRLAN_MAX_HEADER);
	
	/* skb headroom large enough to contain IR-headers? */
	if ((skb_headroom(skb) < IRLAN_MAX_HEADER) || (skb_shared(skb))) {
		struct sk_buff *new_skb = 
			skb_realloc_headroom(skb, IRLAN_MAX_HEADER);
		ASSERT(new_skb != NULL, return 0;);
		ASSERT(skb_headroom(new_skb) >= IRLAN_MAX_HEADER, return 0;);

		/*  Free original skb, and use the new one */
		dev_kfree_skb(skb);
		skb = new_skb;
	} 

	dev->trans_start = jiffies;
	self->stats.tx_packets++;
	self->stats.tx_bytes += skb->len; 

	/*
	 *  Now queue the packet in the transport layer
	 *  FIXME: clean up the code below! DB
	 */
	if (self->use_udata) {
		irttp_udata_request(self->tsap_data, skb);
		dev->tbusy = 0;
	
		return 0;
	}

	if (irttp_data_request(self->tsap_data, skb) == -1) {
		/*  
		 *  IrTTPs tx queue is full, so we just have to drop the
		 *  frame! You might think that we should just return -1
		 *  and don't deallocate the frame, but that is dangerous
		 *  since it's possible that we have replaced the original
		 *  skb with a new one with larger headroom, and that would
		 *  really confuse do_dev_queue_xmit() in dev.c! I have
		 *  tried :-) DB
		 */
		dev_kfree_skb(skb);
		++self->stats.tx_dropped;
		
		return 0;
	}
	dev->tbusy = 0; /* Finished! */
	
	return 0;
}

/*
 * Function irlan_eth_receive (handle, skb)
 *
 *    This function gets the data that is received on the data channel
 *
 */
void irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb)
{
	struct irlan_cb *self;

	self = (struct irlan_cb *) instance;

	ASSERT(self != NULL, return;);
	ASSERT(self->magic == IRLAN_MAGIC, return;);

	if (skb == NULL) {
		++self->stats.rx_dropped; 
		return;
	}
	ASSERT(skb->len > 1, return;);
		
	/* 
	 * Adopt this frame! Important to set all these fields since they 
	 * might have been previously set by the low level IrDA network
	 * device driver 
	 */
	skb->dev = &self->dev;
	skb->protocol=eth_type_trans(skb, skb->dev); /* Remove eth header */
	
	netif_rx(skb);   /* Eat it! */
	
	self->stats.rx_packets++;
	self->stats.rx_bytes += skb->len; 

/* 	net_bh(); */
}

/*
 * Function irlan_eth_flow (status)
 *
 *    Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by 
 *    controlling the dev->tbusy variable.
 */
void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
{
	struct irlan_cb *self;
	struct device *dev;

	DEBUG(4, __FUNCTION__ "()\n");

	self = (struct irlan_cb *) instance;

	ASSERT(self != NULL, return;);
	ASSERT(self->magic == IRLAN_MAGIC, return;);
	
	dev = &self->dev;

	ASSERT(dev != NULL, return;);
	
	switch (flow) {
	case FLOW_STOP:
		DEBUG(4, "IrLAN, stopping Ethernet layer\n");

		dev->tbusy = 1;
		break;
	case FLOW_START:
		/* 
		 *  Tell upper layers that its time to transmit frames again
		 */
		DEBUG(4, "IrLAN, starting Ethernet layer\n");

		dev->tbusy = 0;

		/* 
		 *  Ready to receive more frames, so schedule the network
		 *  layer
		 */
		mark_bh(NET_BH);		
		break;
	default:
		DEBUG(0, __FUNCTION__ "(), Unknown flow command!\n");
	}
}

/*
 * Function irlan_eth_rebuild_header (buff, dev, dest, skb)
 *
 *    If we don't want to use ARP. Currently not used!!
 *
 */
void irlan_eth_rebuild_header(void *buff, struct device *dev, 
			      unsigned long dest, struct sk_buff *skb)
{
	struct ethhdr *eth = (struct ethhdr *) buff;

	memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
	memcpy(eth->h_dest, dev->dev_addr, dev->addr_len);

	/* return 0; */
}

/*
 * Function set_multicast_list (dev)
 *
 *    Configure the filtering of the device
 *
 */
#define HW_MAX_ADDRS 4 /* Must query to get it! */
void irlan_eth_set_multicast_list(struct device *dev) 
{
 	struct irlan_cb *self;

 	self = dev->priv; 

	DEBUG(0, __FUNCTION__ "()\n");
	return;
 	ASSERT(self != NULL, return;); 
 	ASSERT(self->magic == IRLAN_MAGIC, return;);

	if (dev->flags&IFF_PROMISC) {
		/* Enable promiscuous mode */
		DEBUG(0, "Promiscous mode not implemented\n");
		/* outw(MULTICAST|PROMISC, ioaddr); */
	}
	else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS) {
		/* Disable promiscuous mode, use normal mode. */
		DEBUG(4, __FUNCTION__ "(), Setting multicast filter\n");
		/* hardware_set_filter(NULL); */

		irlan_set_multicast_filter(self, TRUE);
	}
	else if (dev->mc_count) {
		DEBUG(4, __FUNCTION__ "(), Setting multicast filter\n");
		/* Walk the address list, and load the filter */
		/* hardware_set_filter(dev->mc_list); */

		irlan_set_multicast_filter(self, TRUE);
	}
	else {
		DEBUG(4, __FUNCTION__ "(), Clearing multicast filter\n");
		irlan_set_multicast_filter(self, FALSE);
	}

	if (dev->flags & IFF_BROADCAST) {
		DEBUG(4, __FUNCTION__ "(), Setting broadcast filter\n");
		irlan_set_broadcast_filter(self, TRUE);
	} else {
		DEBUG(4, __FUNCTION__ "(), Clearing broadcast filter\n");
		irlan_set_broadcast_filter(self, FALSE);
	}
}

/*
 * Function irlan_get_stats (dev)
 *
 *    Get the current statistics for this device
 *
 */
struct enet_statistics *irlan_eth_get_stats(struct device *dev) 
{
	struct irlan_cb *self = (struct irlan_cb *) dev->priv;

	ASSERT(self != NULL, return NULL;);
	ASSERT(self->magic == IRLAN_MAGIC, return NULL;);

	return &self->stats;
}
