TEXT View Source
       
       # SANYO ELECTRIC CO., LTD.
       
          HI-SY77E
       
          Device Type       CD-ROM                                       
          Interface         ATAPI                                        
          Spin Rate         4x                                           
          Formats Supported CD-DA, CD-Bridge, CD-I (Mode 2, Form 1 &     
                            Mode 2, Form 2), CD-I Ready, CD-ROM (Mode 1) 
                            Photo-CD (Single & Multi-session), CD-XA     
                            (Mode 2, Form 1 & Mode 2 , Form 2)           
          View              Top                                          
       
   IMG IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |     Function      | Label |        Function        | Label |
          |-------------------+-------+------------------------+-------|
          | Audio line out    |  CN1  | Frame ground terminal  |  CN3  |
          |-------------------+-------+------------------------+-------|
          | Not Used          |  CN2  |                        |       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     ATAPI MASTER/SLAVE                     |
          |------------------------------------------------------------|
          |          Setting           |  JP1/1   |  JP1/2   |  JP1/3  |
          |----------------------------+----------+----------+---------|
          |     | Single drive only    |  Closed  |   Open   |  Open   |
          |-----+----------------------+----------+----------+---------|
          | »   | Master in two drive  |  Closed  |   Open   |  Open   |
          |     | system               |          |          |         |
          |-----+----------------------+----------+----------+---------|
          |     | Slave in two drive   |   Open   |  Closed  |  Open   |
          |     | system               |          |          |         |
          |-----+----------------------+----------+----------+---------|
          |     | Master/Slave         |   Open   |   Open   | Closed  |
          |     | determined by Cable  |          |          |         |
          |     | Select               |          |          |         |
          |------------------------------------------------------------|
          |      Note: ‘Single drive’ refers to the sole drive         |
          |      connected to an IDE interface (there may be up to two |
          |      on a given system). Master & Slave refer to two       |
          |      drives connected to an interface.                     |
          +------------------------------------------------------------+