PINNACLE MICRO, INC. ==================== RCD 5040 (EXTERNAL) Device Type Recordable CD Interface SCSI-1 Spin Rate - Read 4x Spin Rate - Write 2x Formats Supported Unidentified View Top +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------------+-------+----------------+-------| | Audio out - right channel | CN1 | Chassis ground | CN3 | |---------------------------+-------+----------------+-------| | Audio out - left channel | CN2 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) - NOT DIAGRAMMED | |------------------------------------------------------------| | LED | Color | Status | Condition | |-------------+--------+----------+--------------------------| | Speed - | Green | On | 4x and 2x spin rate | | front panel | | | | |-------------+--------+----------+--------------------------| | Speed - | Yellow | On | 1x spin rate | | front panel | | | | |-------------+--------+----------+--------------------------| | Speed - | N/A | Off | No disc inserted | | front panel | | | | |-------------+--------+----------+--------------------------| | Busy - | Green | On | Reading data from disc | | front panel | | | | |-------------+--------+----------+--------------------------| | Busy - | Yellow | On | Writing data or audio to | | front panel | | | disc | |-------------+--------+----------+--------------------------| | Busy - | Yellow | Blinking | Playing audio | | front panel | | | | |-------------+--------+----------+--------------------------| | Busy - | N/A | Off | Idle or no disc inserted | | front panel | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | SCSI ID selection: | | | | SW1 is for SCSI ID selection, 0 through 7. Default setting | | is 2. To select SCSI ID, turn off the power, press the top | | button to increase value and the bottom button to decrease | | value. The new SCSI ID will be registered when the power | | is turned on then off again. | | | | Termination: | | | | When terminating the drive, make sure the power is turned | | off, then plug a passive SCSI-1 terminator block to one of | | the SCSI-1 ports on the back panel. | | | | Host adapter for the RCD 5040 in a PC system is Adaptec | | AHA-1535. | +------------------------------------------------------------+